There are three kinds of winter boots: insulated winter hiking boots, mountaineering boots, and pac boots. Which kind of winter hiking boot is right for you? Here’s a detailed guide that explains the differences between these so you can pick the right footwear for winter hiking, snowshoeing, winter backpacking, and winter mountaineering.
What should you look for when buying a pair of winter hiking boots?
Winter boots should be insulated and waterproof to keep your feet warm, they should have laces and not be slip-ons, they should be comfortable so you can walk or snowshoe in them all day, and they should be compatible with winter traction aids like microspikes, snowshoes, and crampons.
While the amount of insulation you need will vary on the distance and temperatures you hike or snowshoe in, winter boots with non-removable synthetic insulation are the lightest weight and therefore the easiest to hike in. Boots made with synthetic materials are also lighter weight and more waterproof than leather boots. The most comfortable boots for winter hiking are the ones that come over your ankles like regular hiking boots.
What is the difference between 400g and 200g insulation?
Winter boots are available with 400-gram insulation and 200-gram insulation. This refers to the thickness of the insulation used, not its weight. Boots with 400-gram insulation will keep you warm to 20-40 below zero degrees (F), while boots with 200-gram insulation are good to about 0-10 degrees above zero degrees (F). These temperatures assume you are walking, not standing around.
We recommend the following insulated 400g and 200g insulated winter hiking boots:
While all winter boots are compatible with traction devices like microspikes and snowshoes, it is important to make sure that they don’t create undue pressure on your toes (particularly) when attached to your boots which can lead to discomfort and blistering. Crampons are a little trickier since you need the right type of crampon to work with the insulated winter hiking boots described above. This is explained further below.
Comparing insulated winter hiking boots and mountaineering boots:
Mountaineering boots have very rigid soles so they can be used with crampons for ice climbing and scrambling over ice-covered rock. Leather and synthetic mountaineering boots also tend to have less insulation, they’re heavier and less comfortable than most insulated winter boots, which have softer flexible soles that are easier to walk in. While special flexible crampons are available for softer-soled insulated hiking boots, they cannot be used for ice climbing which requires a rigid mountaineering boot sole and an ice climbing crampon.
We recommend the following mountaineering boots for winter hiking and non-technical mountaineering:
- La Sportiva Nepal EVO GTX Mountaineering Boots
- Lowa Mountain Expert II GTX EVO Mountaineering Boots
- Scarpa Mont Blanc Pro GTX Mountaineering Boots
There are two types of mountaineering boots, single-layer boots, and double boots. Single-layer boots are intended for day hiking in alpine terrain, unprotected by tree cover. Double-layer insulated mountaineering boots have removable liners which make them warmer for people who get cold feet. They’re also preferred for overnight and multi-day trips since the liners can be removed and put into your sleeping bag to prevent the perspiration that’s accumulated in them from freezing overnight.
Comparing insulated winter hiking boots and pac boots:
Pac boots are winter boots that usually have a rubber lower half and a leather or synthetic upper, often with a removable felt liner. Pac boots are designed to keep your feet warm in the harshest weather conditions but are ungainly for walking and snowshoeing because they are heavy, they run up well above the ankle, and they have very poor ankle support. They’re mainly good for ice fishing and snowmobiling, where the amount of walking you need to do it minimal.
Example pac boots:
Pac boots are also too large to fit microspikes, crampons, and often snowshoes which are winter hiking essentials. In general, pac boots are best used for less vigorous winter activities like snowmobiling or ice fishing.
Why can’t I use my regular hiking boots for winter hiking?
It comes down to waterproofing and insulation. Most insulated winter hiking boots are guaranteed waterproof out of the box. Many have lowers made with rubber or waterproof synthetics so you can tramp through puddles and wet snow without worrying about the fabric absorbing water. If you do get moisture in your boots because it comes over the tops of your feet and calves perspire heavily, insulated winter boots will still keep them warm. The same can’t be said about regular leather or synthetic hiking boots, even when treated with waterproofing creams and sprays. If your regular hiking boots absorb water in winter, they can easily freeze, and lead to discomfort, frostnip, or frostbite in extreme cases, on long winter hikes.
How important is it to have Gore-tex or waterproof/breathable insulated winter boots?
You often don’t have a choice. Most insulated winter hiking boots are only available with built-in waterproof/breathable membranes. While breathability is important in winter, perspiration is bound to accumulate in your socks and boots when your feet sweat, even if your boots are made with a waterproof/breathable liner. If your feet do get damp, the most important thing is to have insulated boots to keep them warm.
How accurate are warmth ratings for boots?
While some boot manufacturers provide warmth ratings for their products, there’s no standard way to measure the warmth of winter boots. Understand that these ratings are directional at best and that users will have varying experiences based on their activity level, health, weight, sex, metabolism, and other factors. My advice: read customer reviews and try to buy winter hiking boots that have been available for multiple seasons so more is known about their performance. Referrals from friends and trusted sources are best.
How much insulation should winter boots have?
Some insulated winter boot manufacturers publish the amount of insulation in their boots, while others don’t. For example, some boots have 200 gram Thinsulate insulation, and synthetic insulation, while others have 400 gram Thinsulate (This denotes the thickness of the insulation, not its weight.) While boots with more insulation are likely to be warmer, comparisons between different models depend on the type of insulation, boot design, and individual user differences in terms of activity, health, weight, etc. That said, winter boots with more insulation are preferred for hiking in subfreezing temperatures on long hikes or for highly exposed alpine routes without vegetation cover.
What are the most popular forms of insulation in winter hiking boots?
Manufacturers use a wide range of synthetic insulations in winter hiking boots, many of them proprietary. One of the most popular forms of synthetic insulation is called Thinsulate and is made with polypropylene fibers. Boots with 200-gram Thinsulate are best used in early winter or spring in moderate temperatures or for high activity levels. Boots with 400-gram Thinsulate insulation or more are better for much colder winter temperatures below freezing.
What are the most important features to look for on insulated winter hiking boots, beyond waterproofing and breathability?
Temperature rating: While you need to take manufacturers’ temperature ratings with a grain of salt, they are a good indication of the relative warmth of a boot.
Amount of insulation: While it’s difficult to make warmth comparisons between boots with different kinds of insulation, knowing the amount of insulation used in boots can help you compare the warmth of different models made by the same manufacturer.
Reinforced toe cap: In addition to providing kick protection, a sturdy toe cap won’t collapse the front of the boot and potentially cause blisters when used with tight-fitting microspikes or crampons.
Gusseted tongue: This is just like a regular boot or shoe tongue, except the sides of the tongue are closed and sewn to the interior of the boot. This helps prevent water from leaking through the laces and into the boot when you step into deep puddles.
Cuff: The top of your boot, where it surrounds your calf is called the cuff. Look for boots with a soft cuff that closes off the gap between your leg and boot while staying comfortable during a long day of hiking. It will also trap heat and prevent snow from falling down your boot if you have to walk through deep snow.
Lugs: The soles of your boots should provide good traction when walking on loose or packed snow. Look for boots with a deep tread like a Vibram sole. When walking on ice, you’re likely to augment your boot with traction aids like microspikes or crampons.
Gaiter ring: A gaiter ring is a small ring attached to the top of the toe box that you can hook your gaiters onto to prevent them from riding up your leg. It’s not the end of the world if your boots don’t have one: you can still usually hook the gaiter to your boot laces, but most insulated winter hiking boots have them.
How should winter hiking boots fit?
It’s important not to wear tight-fitting boots because they will restrict blood flow resulting in cold feet. There should be some wiggle room for your toes, you want to minimize the amount of lateral movement in the boot without feeling like your foot is being squished, and make sure that your heel doesn’t lift when walking with the boot laced up.
Be sure to try on winter hiking boots with the socks you intend on wearing to hike, especially if you use thicker, warmer socks in winter. If you’re between sizes, it’s always easier to shim out the extra space by wearing thicker socks or by replacing the boot’s insoles with higher volume insoles, like Superfeet, than trying to fit into boots that are too small.
How can you avoid getting blisters in winter hiking boots?
Make sure you break them in well before hiking in them in winter, even if it means sweating through some hikes in warmer weather to soften them up. Learn how to lace your boots to relieve any pressure on the top of your foot, eliminate heel lift, or keep your laces from slipping loose when you tie them. Test out and fit all of your traction devices in advance of needing them, including microspikes, snowshoes, and crampons, so you can identify potential hot spots and take the necessary corrective actions in advance. This may include taping your feet with leukotape, wearing different socks, or re-adjusting traction aids so they don’t rub you in a bad place.
What are microspikes?
Microspikes are like tire chains for your boots. They’re pointed pieces of metal connected to short chains and elastic bands that wrap around your boots to give you traction when walking on ice and snow. While they work with all boots, it’s important to get ones that fit your boot size so they don’t break when overstretched. You also want to make sure that the toe box of your boots doesn’t collapse under them, which can cause discomfort and toe blistering.
What kinds of crampons are compatible with insulated winter hiking boots?
Insulated winter hiking boots have softer soles that bend when you walk, flexing in the middle of the sole under the ball of your foot and the arch. If you want to use crampons, you need ones that have a flexible center bar connecting the front and heel spikes that can bend with the sole and not break.
Recommended crampons for soft-soled winter hiking boots:
- Kahtoola K10 Hiking Crampons
- Kahtoola KTS Hiking Crampon
- Black Diamond Contact Strap Crampons
- Grivel G10 New Classic EVO Crampons
These attach to your boots with what are called universal bindings which are plastic hoops that wrap around your heel and the front of your boots and are secured using webbing straps. They’re not intended for ice climbing but are good for walking across crusty snowfields and low-angle ice.
Are insulated winter hiking boots, mountaineering boots, and pac boots all compatible with snowshoes?
Generally yes, but it can depend on the size of your boots and the length of your snowshoe bindings. High-volume boots, such as mountaineering boots and pac boots, may require some binding adjustment such as longer binding straps or webbing. Be sure to test their compatibility before you need them on a winter hike.
How often do you need to replace winter hiking boots?
Winter hiking boot soles last much longer than regular hiking boots because you’re hiking on snow and ice, not abrasive dirt or gravel. Winter hiking boots tend to wear out when one of their seams works loose and splits. You can usually extend their life when this happens by having them repaired by a shoemaker or by pre-emptively strengthening your boot seams using Silicone seam sealer or Shoe-Goo to strengthen them.
SectionHiker is reader-supported. We only make money if you purchase a product through our affiliate links. Help us continue to test and write unsponsored and independent gear reviews, beginner FAQs, and free hiking guides.More Frequently Asked Questions
- Recommended Winter Hiking Gear List
- Winter Pant Layering for Hikers Who Sweat
- Winter Traction and When to Wear It
- How to Stay Hydrated on Winter Hikes
Great post Phil. I’ve had pair of La Sportiva EVO GTX Nepals for 5-6 years and even in coldest winter temps above treeline in NH my feet have never been the slightest bit cold. Those boots are amazing. My only issue would be narrowness of the fit, if I’m wearing traction for a long day I start to get hot spots. I got a pair of Lowa 6000RD boots for a multi-day climb in the Cascades last spring and found the fit to be wider and more comfortable for my feet. And super warm as well.
Those Nepals are lightly insulated and have an insulated footbed. But the thing that really sets them apart from a regular leather boot is the tanning. They are effectively waterproof.
I much prefer winter hiking boots with a REMOVABLE LINER so it can be removed and placed in my sleeping bag overnight to stay warm and avoid dangerously cold toes in the morning while preparing breakfast and breaking camp.
To me this feature is a must.
I usually put my hot Nalgenes with the day’s water in my boots to warm them up in the AM, having booties for around camp.
Phillip, you’re no longer recommending the Baffin Borealis boots as a best-of-both-worlds hybrid?
I do, but not in this article which is focused on day hiking /peakbagging and not winter backpacking trips where a removable liner is highly desirable. There’s a reason it’s called a winter hiking boots faq and not a winter backpacking boots faq. But thanks for asking.
Actually – I do mention the Borealis above…in the context of overnight trips.
Is “there a reason” you’re elevating form over function in the (needlessly dismissive?) response to the question? A removable liner isn’t a prima facie disqualifying feature for hiking day trips and, conversely, there are people who don’t always opt for removable liners when winter backpacking. Indeed, I can see the benefits (in some winter day hikes) of a removable liner in a boot like the Borealis being way beneficial, especially when compared to other much larger, heavier plastic mountaineering boots over some of the other “hiking” options you mention even when someone is day hiking (esp in the East).
Like what advantage? I day-hiked for years in a double plastic boot (with an interior liner) and it was the wrong tool for the job. It’s passable for overnights, but even then a single layer boot with a vapor barrier liner is much ore comfortable. There’s also the added gotcha that there are no good double layer plastic boots anymore that are actually good for hiking in. The Scarpa Inverno? You’d be better off wearing cinder blocks and even the Borealis is not something I’d recommend for a long hike. It’s much blockier compared to a good 400g single layer boot.
Even if you’re not overnighting outdoors, having a stiff(er) hiking boot that can handle snowshoes or crampons and dry out overnight is a good enough advantage to me. No, not the Inverno (but good one picking low hanging fruit there!). I’ve enjoyed day-hiking in the Borealis even when I’ve tucked into a solid, heated building for the night only to head out the next day and the next. I get a solid boot that’s dry. That’s just me; I just think it’s not a bright line.
Hi Phil:
I am new to hiking and to your website. So far, I love it. I have a permit for March 23 for the Pacific Crest Trail. I have trail runner, New Balance Hierro V for shoe. If I hike to the Sierra by May 1, do you think the trail runner is ok to use or should I switch out and use a hiking insulated boot?
I’m probably not the right person to ask about trail conditions in early May n the sierra. Why don’t you contact the PCTA and get advice from them. https://www.pcta.org/